MT9234ZPX-UPCI-CP Multi-Tech Systems, MT9234ZPX-UPCI-CP Datasheet - Page 9

• Manufacturer Part Number: MT9234ZPX-UPCI-CP
• Description: MODEM V.92 DATA/FAX/VOICE WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZPXr

Specifications of MT9234ZPX-UPCI-CP

• Data Format: V.92
• Baud Rates: -
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Mounting Type: Socket
• Package / Case: 6.0" L x 4.8" W x 0.7" H (152mm x 122mm x 18mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

E
Description:
Syntax:
Values:
Default:
F
Description:
Syntax:
Values:
Default:
Result Codes:
H
Description:
Syntax:
Values:
Default:
Result Codes:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Echo Command
Enables or disables the modem's echo feature. When the echo feature is selected
and the modem is in the command mode, characters sent to the modem are sent
back to the host and displayed on the monitor.
ATE<value>
0
1
1
Online Data Character Echo Command
Controller-based products support this command to ensure backward compatibility
ATF<value>
0
1
1
OK if <value> = 1
ERROR if <value> ≠ 1.
Hook Control
Instructs the modem to go on-hook to disconnect a call or go off-hook to make the
telephone line busy.
ATH<value>
0
1
0
OK if <value> = 0 to 1
ERROR if <value> ≠ 0 to 1.
with communications software that issues the F1 command.
Do not echo keyboard input to the terminal.
Do echo keyboard input to the terminal.
Enable online data character echo. (Not supported.)
Disable online data character echo (included for backward compatibility).
Go on-hook (hang up).
Go off-hook (make the phone line busy).
Chapter 1 – AT Commands, S-Registers, and Result Codes
9