ZLF645E0P2032G Zilog, ZLF645E0P2032G Datasheet - Page 36

• Manufacturer Part Number: ZLF645E0P2032G
• Description: Microcontrollers (MCU) 32K Flash 1K RAM 20 pin
• Manufacturer: Zilog

Specifications of ZLF645E0P2032G

• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 1 KB
• Interface Type: ICP, UART
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 3
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Package / Case: PDIP-20
• Minimum Operating Temperature: 0 C
• Lead Free Status / Rohs Status: Details

PS026407-0408
Port 4
Note:
Comparator Inputs
Comparator Outputs
In ANALOG mode, P31 and P32 have a comparator front end. The comparator reference
is supplied by P33 and P
corresponding IRQ1 are diverted to the Stop Mode Recovery sources (excluding P31, P32,
and P33) as displayed in
the Port 3 input register, which then generates IRQ1.
Comparators are powered down by entering STOP mode. For P30:P33 to be used as an
SMR source, these inputs must be placed into DIGITAL mode.
The comparators can be programmed to output on P34 and P37 by setting bit 0 of the
PCON register.
Port 4 is an 8-bit bidirectional CMOS-compatible I/O port. Its eight I/O lines can be
independently configured under software control as inputs or outputs. Port 4 is always
available for I/O operation. A flash programming option bit is available to connect eight
pull-up transistors on this port. Bits programmed as outputs are globally programmed as
either push/pull or open-drain. The POR function resets with the eight bits of Port 4
[P47:40] configured as inputs.
Figure 9
REF1
Figure 11
. In ANALOG mode, the P33 internal data latch and its
on page 24. In DIGITAL mode, P33 is used as bit 3 of
on page 29 displays the Port 4 configuration.
ZLF645 Series Flash MCUs
Product Specification
Port 4
28