5962-8959837MZA E2V, 5962-8959837MZA Datasheet - Page 6

• Manufacturer Part Number: 5962-8959837MZA
• Manufacturer: E2V

Specifications of 5962-8959837MZA

• Lead Free Status / Rohs Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered
to this drawing.
herein) involving devices acquired to this drawing is required for any change that affects this drawing.
the option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be
made available onshore at the option of the reviewer.
with MIL-PRF-38535 or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM
plan shall not affect the form, fit, or function as described herein. For device class M, sampling and inspection procedures
shall be in accordance with MIL-PRF-38535, appendix A.
conducted on all devices prior to qualification and technology conformance inspection. For device class M, screening shall be
in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices prior to quality conformance
inspection.
accordance with MIL-PRF-38535. Inspections to be performed shall be those specified in MIL-PRF-38535 and herein for
groups A, B, C, D, and E inspections (see 4.4.1 through 4.4.4).
microcircuit group number 41 (see MIL-PRF-38535, appendix A).
3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in
3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2
3.9 Verification and review for device class M. For device class M, DSCC, DSCC's agent, and the acquiring activity retain
3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in
3.11 Substitution. Substitution data shall be as indicated in appendix B herein.
4. VERIFICATION
4.1 Sampling and inspection. For device classes Q and V, sampling and inspection procedures shall be in accordance
4.2 Screening. For device classes Q and V, screening shall be in accordance with MIL-PRF-38535, and shall be
4.2.1 Additional criteria for device class M.
4.2.2 Additional criteria for device classes Q and V.
4.3 Qualification inspection for device classes Q and V. Qualification inspection for device classes Q and V shall be in
a.
b.
c.
a.
b.
c.
DEFENSE SUPPLY CENTER COLUMBUS
Delete the sequence specified as initial (preburn-in) electrical parameters through interim (postburn-in)
The test circuit shall be maintained by the manufacturer under document revision level control and shall be made
Interim and final electrical parameters shall be as specified in table IIA herein.
Additional screening for device class V beyond the requirements of device class Q shall be as specified in MIL-PRF-
electrical parameters of method 5004 and substitute lines 1 through 6 of table IIA herein.
available to the preparing or acquiring activity upon request. The test circuit shall specify the inputs, outputs, biases,
and power dissipation, as applicable, in accordance with the intent specified in method 1015.
(1)
The burn-in test duration, test condition and test temperature, or approved alternatives shall be as specified in the
device manufacturer's QM plan in accordance with MIL-PRF-38535. The burn-in test circuit shall be maintained
under document revision level control of the device manufacturer's Technology Review Board (TRB) in accordance
with MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit
shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified
in method 1015 of MIL-STD-883.
Interim and final electrical test parameters shall be as specified in table IIA herein.
38535, appendix B.
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
Dynamic burn-in (method 1015 of MIL-STD-883, test condition D; for circuit, see 4.2.1b herein).
STANDARD
SIZE
A
REVISION LEVEL
R
SHEET
5962-89598
6