AT32UC3L064 Atmel Corporation, AT32UC3L064 Datasheet - Page 701

• Manufacturer Part Number: AT32UC3L064
• Manufacturer: Atmel Corporation

Specifications of AT32UC3L064

• Flash (kbytes): 64 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 50 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 17
• Hardware Qtouch Acquisition: Yes
• Max I/o Pins: 36
• Ext Interrupts: 36
• Usb Speed: No
• Usb Interface: No
• Spi: 5
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 460
• Analog Comparators: 8
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.62 to 3.6
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 35
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

30.7.2
Name:
Access Type:
Offset:
Reset Value:
• TRMIS: Transmit Mismatch
• OVERRUN: Data Overrun
• DREADYINT: Data Ready Interrupt
• READYINT: Ready Interrupt
• CENABLED: Clock Enabled
32099G–06/2011
31
23
15
7
-
-
-
-
0: No transfers mismatches.
1: The transceiver was active when receiving.
This bit is set when the transceiver is active when receiving.
This bit is cleared when corresponding bit in SCR is written to one.
0: No data overwritten in RHR.
1: Data in RHR has been overwritten before it has been read.
This bit is set when data in RHR is overwritten before it has been read.
This bit is cleared when corresponding bit in SCR is written to one.
0: No new data in the RHR.
1: New data received and placed in the RHR.
This bit is set when new data is received and placed in the RHR.
This bit is cleared when corresponding bit in SCR is written to one.
0: The interface has not generated an ready interrupt.
1: The interface has had a transition from busy to not busy.
This bit is set when the interface has transition from busy to not busy.
This bit is cleared when corresponding bit in SCR is written to one.
0: The aWire clock is not enabled.
1: The aWire clock is enabled.
Status Register
30
22
14
6
-
-
-
-
SR
Read-only
0x04
0x00000000
TRMIS
29
21
13
5
-
-
-
28
20
12
4
-
-
-
-
27
19
11
3
-
-
-
-
CENABLED
OVERRUN
26
18
10
2
-
-
AT32UC3L016/32/64
DREADYINT
25
17
9
1
-
-
-
READYINT
BUSY
24
16
8
0
-
-
701