SAM3N2A Atmel Corporation, SAM3N2A Datasheet - Page 152

• Manufacturer Part Number: SAM3N2A
• Manufacturer: Atmel Corporation

Specifications of SAM3N2A

• Flash (kbytes): 128 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 48 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 23
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 47
• Ext Interrupts: 47
• Quadrature Decoder Channels: 2
• Usb Speed: No
• Usb Interface: No
• Spi: 2
• Twi (i2c): 2
• Uart: 3
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

152
SAM3N
The CMSIS provides thread-safe code that gives atomic access to the Interrupt Priority Regis-
ters. For more information see the description of the NVIC_SetPriority function in
programming hints” on page
onto the interrupt registers and corresponding CMSIS variables that have one bit per interrupt.
Table 10-28. Mapping of interrupts to the interrupt variables
1.
Interrupts
0-32
• the 4-bit fields of the Interrupt Priority Registers map to an array of 4-bit integers, so that the
array IP[0] to IP[32] corresponds to the registers IPR0-IPR8, and the array entry IP[n] holds
the interrupt priority for interrupt n.
Each array element corresponds to a single NVIC register, for example the element
ICER[0] corresponds to the ICER0 register.
CMSIS array elements
Set-enable
ISER[0]
Clear-enable
ICER[0]
163.
Table 10-28
(1)
Set-pending
ISPR[0]
shows how the interrupts, or IRQ numbers, map
Clear-pending
ICPR[0]
Active Bit
IABR[0]
11011A–ATARM–04-Oct-10
“NVIC