STM32L151C8 STMicroelectronics, STM32L151C8 Datasheet - Page 72

• Manufacturer Part Number: STM32L151C8
• Description: Ultra-low-power ARM Cortex-M3 MCU with 64 Kbytes Flash, 32 MHz CPU, LCD, USB
• Manufacturer: STMicroelectronics

Specifications of STM32L151C8

• Operating Power Supply Range: 1.65 V to 3.6 V (without BOR) or 1.8 V to 3.6 V (with BOR option)
• Temperature Range: –40 to 85 °C
• 4 Modes: Sleep, Low-power run (9 μA at 32 kHz), Low-power sleep (4.4 μA),Stop with RTC (1.45 μA), Stop (570 nA), Standby (300 nA)
• Ultralow Leakage Per I/o: 50 nA
• Fast Wakeup From Stop: 8 μs
• Core: ARM 32-bit Cortex™-M3 CPU
• Dma: 7-channel DMA controller, supporting timers, ADC, SPIs, I2Cs and USARTs

Electrical characteristics
72/109
Functional susceptibility to I/O current injection
While a simple application is executed on the device, the device is stressed by injecting
current into the I/O pins programmed in floating input mode. While current is injected into the
I/O pin, one at a time, the device is checked for functional failures.
The failure is indicated by an out of range parameter: ADC error, out of spec current
injection on adjacent pins or other functional failure (for example reset, oscillator frequency
deviation, LCD levels, etc.).
The test results are given in the following table.
Table 37.
Symbol
I
INJ
I/O current injection susceptibility
Injected current on true open-drain pins
Injected current on all 5 V tolerant (FT) pins
Injected current on any other pin
Description
Doc ID 17659 Rev 6
Functional susceptibility
Negative
injection
-5
-5
-5
STM32L151xx, STM32L152xx
injection
Positive
+0
+0
+5
Unit
mA