STM8AF6248 STMicroelectronics, STM8AF6248 Datasheet - Page 16

• Manufacturer Part Number: STM8AF6248
• Description: STM8AF62 Standard Line
• Manufacturer: STMicroelectronics

Specifications of STM8AF6248

• Max Fcpu: 16 MHz
• Flash Program Memory: 16 to 32 Kbytes Flash; data retention 20 years at 55 °C after 1 kcycle
• Data Memory: 0.5 to 1 Kbyte true data EEPROM; endurance 300 kcycles
• Ram: 1 to 2 Kbytes
• Advanced Control Timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

Product overview
5.5.3
5.5.4
5.5.5
5.5.6
16/91
128 kHz low-speed internal RC oscillator (LSI)
The frequency of this clock is 128 kHz and it is independent from the main clock. It drives
the independent watchdog or the AWU wakeup timer.
In systems which do not need independent clock sources for the watchdog counters, the
128 kHz signal can be used as the system clock. This configuration has to be enabled by
setting an option byte (OPT3/OPT3N, bit LSI_EN).
16 MHz high-speed external crystal oscillator (HSE)
The external high-speed crystal oscillator can be selected to deliver the main clock in
normal Run mode. It operates with quartz crystals and ceramic resonators.
●
●
●
External clock input
An external clock signal can be applied to the OSCIN input pin of the crystal oscillator. The
frequency range is 0 to 16 MHz.
Clock security system (CSS)
The clock security system protects against a system stall in case of an external crystal clock
failure.
In case of a clock failure an interrupt is generated and the high-speed internal clock (HSI) is
automatically selected with a frequency of 2 MHz (16 MHz/8).
Table 4.
Frequency range: 1 MHz to 16 MHz
Crystal oscillation mode: preferred fundamental
I/Os: standard I/O pins multiplexed with OSCIN, OSCOUT
Peripheral clock gating bits
Control bit
PCKEN27
PCKEN26
PCKEN25
PCKEN24
PCKEN23
PCKEN22
PCKEN21
PCKEN20
Doc ID 14952 Rev 5
STM8AF61xx, STM8AF62xx
Peripheral
AWU
ADC