ST7263BE6 STMicroelectronics, ST7263BE6 Datasheet - Page 172
ST7263BE6
Manufacturer Part Number
ST7263BE6
Description
LOW SPEED USB 8-BIT MCU FAMILY WITH UP TO 32K FLASH/ROM, DFU CAPABILITY, 8-BIT ADC, WDG, TIMER, SCI and I2C
Manufacturer
STMicroelectronics
Datasheet
1.ST7263BH6.pdf
(186 pages)
Specifications of ST7263BE6
4, 8, 16 Or 32 Kbytes Program Memory
high density Flash (HDFlash), FastROM or ROM with Read-Out and Write protection
- Current page: 172 of 186
- Download datasheet (3Mb)
Device configuration and ordering information
15
15.1
172/186
Device configuration and ordering information
Each device is available for production in user programmable versions (High Density
FLASH).
ST72F63B FLASH devices are shipped to customers with a default content (FFh).
This implies that FLASH devices have to be configured by the customer using the Option
Byte while the ROM devices are factory-configured.
Option byte
The Option Byte allows the hardware configuration of the microcontroller to be selected.
The Option Byte has no address in the memory map and can be accessed only in
programming mode using a standard ST7 programming tool. The default contents of the
FLASH is fixed to F7h. This means that all the options have “1” as their default value, except
LVD.
In ROM devices, the Option Byte is fixed in hardware by the ROM code.
Option Byte
--
7
OPT 7:6 Reserved
OPT 5 WDGSW Hardware or Software Watchdog
OPT 4 WDHALT Watchdog and Halt mode
OPT 3 LVD Low voltage detector selection
--
This option bit selects the watchdog type.
0: Hardware enabled
1: Software enabled
This option bit determines if a reset is generated when entering Halt mode while the
Watchdog is active.
0: No Reset generation when entering Halt mode
1: Reset generation when entering Halt mode
This option bit selects the LVD.
0: LVD enabled
1: LVD disabled
Note: Important: on ST7263BK1M1, ST7263BK2M1, ST7263BK2B1, and
ST7263BK2B1 ROM devices, this option bit is forced by ST to 0 (LVD
always enabled).
WDG SW
Doc ID 7516 Rev 8
WD HALT
LVD
--
OSC 24/12
ST7263Bxx
FMP_R
0
Related parts for ST7263BE6
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
LOW SPEED USB 8-BIT MCU FAMILY with up to 16K MEMORY, up to 512 BYTES RAM, 8-BIT ADC, WDG, TIMER, SCI & I2C
Manufacturer:
STMICROELECTRONICS [STMicroelectronics]
Datasheet:
Part Number:
Description:
MCU, MPU & DSP Development Tools ST7 Emulator Board
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
STMicroelectronics [RIPPLE-CARRY BINARY COUNTER/DIVIDERS]
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
STMicroelectronics [LIQUID-CRYSTAL DISPLAY DRIVERS]
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
BOARD EVAL FOR MEMS SENSORS
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
NPN TRANSISTOR POWER MODULE
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
TURBOSWITCH ULTRA-FAST HIGH VOLTAGE DIODE
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
DIODE / SCR MODULE
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
DIODE / SCR MODULE
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
Search -----> STE16N100
Manufacturer:
STMicroelectronics
Datasheet:
Part Number:
Description:
Search ---> STE53NA50
Manufacturer:
STMicroelectronics
Datasheet: