CC2420 Chipcon AS, CC2420 Datasheet - Page 70

• Manufacturer Part Number: CC2420
• Description: 2.4 GHz RF Transceiver for IEEE 802.15.4 and ZigBee
• Manufacturer: Chipcon AS

IOCFG0 (0x1C) – I/O Configuration Register 0
15:12
11
10
9
8
7
6:0
IOCFG1 (0x1D) – I/O Configuration Register 1
15:13
12:10
9:5
4:0
MANFIDL (0x1E) - Manufacturer ID, Lower 16 Bit
15:12
11:0
Chipcon AS SmartRF ® CC2420 Preliminary Datasheet (rev 1.0), 2003-11-17
Bit
Bit
Bit
Field Name
-
-
FIFO_POLARITY
FIFOP_POLARITY
SFD_POLARITY
CCA_POLARITY
FIFOP_THR[6:0]
Field Name
-
HSSD_SRC[2:0]
SFDMUX[4:0]
CCAMUX[4:0]
Field Name
PARTNUM[3:0]
MANFID[11:0]
Reset
0
0
0
0
0
0
64
Reset
0
0
0
0
Reset
2
0x33D
R/W
W0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
W0
R/W
R/W
R/W
R/W
R
R
SmartRF
Description
Reserved, write as 0
Reserved, write as 0
Polarity of the output signal FIFO.
0 : Polarity is as described in the specification
1 : Polarity is inverted as compared to the specification
Polarity of the output signal FIFOP.
0 : Polarity is as described in the specification
1 : Polarity is inverted as compared to the specification
Polarity of the SFD pin.
0 : Polarity is as described in the specification
1 : Polarity is inverted as compared to the specification
Polarity of the CCA pin.
FIFOP_THR sets the threshold in number of bytes in the
RXFIFO for FIFOP to go high.
Description
Reserved, write as 0
The HSSD module is used as follows:
0: Off.
1: Output AGC status (gain setting / peak detector status /
accumulator value)
2: Output ADC I and Q values.
3: Output I/Q after digital downmix and channel filtering.
4: Reserved
5: Reserved
6: Input ADC I and Q values
7: Input DAC I and Q values.
The HSSD module requires that the FS is up and running as it
uses CLK_PRE (~150 MHZ) to produce its ~37.5 MHz data clock
and serialize its output words.
Multiplexer setting for the SFD pin.
Multiplexer setting for the CCA pin.
Description
The device part number. CC2420 has part number 0x002.
Gives the JEDEC manufacturer ID. The actual manufacturer ID
can be found in MANIFID[7:1], the number of continuation bytes
in MANFID[11:8] and MANFID[0]=1.
Chipcon's JEDEC manufacturer ID is 0x7F 0x7F 0x7F 0x9E
(0x1E preceeded by three continuation bytes.)
®
CC2420
Page 70 of 85