PIC16F883 Microchip Technology Inc., PIC16F883 Datasheet - Page 68

• Manufacturer Part Number: PIC16F883
• Description: 28/40/44-pin Flash-based, 8-bit Cmos Microcontrollers With Nanowatt Technology
• Manufacturer: Microchip Technology Inc.

PIC16F882/883/884/886/887
4.5.2.1
The HFINTOSC is factory calibrated but can be
adjusted in software by writing to the OSCTUNE
register (Register 4-2).
The default value of the OSCTUNE register is ‘0’. The
value is a 5-bit two’s complement number.
REGISTER 4-2:
41291D-page 66
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4-0
U-0
—
OSCTUNE Register
Unimplemented: Read as ‘0’
TUN<4:0>: Frequency Tuning bits
01111 = Maximum frequency
01110 =
•
•
•
00001 =
00000 = Oscillator module is running at the calibrated frequency.
11111 =
•
•
•
10000 = Minimum frequency
U-0
—
OSCTUNE: OSCILLATOR TUNING REGISTER
W = Writable bit
‘1’ = Bit is set
U-0
—
R/W-0
TUN4
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
When the OSCTUNE register is modified, the
HFINTOSC frequency will begin shifting to the new
frequency. Code execution continues during this shift.
There is no indication that the shift has occurred.
OSCTUNE does not affect the LFINTOSC frequency.
Operation of features that depend on the LFINTOSC
clock source frequency, such as the Power-up Timer
(PWRT), Watchdog Timer (WDT), Fail-Safe Clock
Monitor (FSCM) and peripherals, are not affected by the
change in frequency.
TUN3
R/W-0
TUN2
© 2007 Microchip Technology Inc.
x = Bit is unknown
R/W-0
TUN1
R/W-0
TUN0
bit 0