NL10276AC28-01L Renesas Electronics Corporation., NL10276AC28-01L Datasheet - Page 28

no-image

NL10276AC28-01L

Manufacturer Part Number
NL10276AC28-01L
Description
36 Cm 14.1 Inches, 1024 X 768 Pixels, Full-color, Multi-scan Function, Built-in Crt Interface Board
Manufacturer
Renesas Electronics Corporation.
Datasheet
* The value of No.5 LCD Data are memorized in every Preset timing.
* Selected adjustment item is displayed with OSD.
* Data except Auto Adjust of 5. LCD Data are saved when it is returned in the extreme upper menu. But it is not
* All adjust value is returned to the NEC factory value when menu type is changed.
* Please sufficiently evaluate the compensation values that Par. Delay and Par. HD of No.5 LCD Data need to set
28
No.
10
saved if the power supply is cut off halfway.
up, before determining the values.
5
6
7
8
9
LCD Data
Sel Data
Information
OSD Position
Used Time
Full Reset
Form
LCD Reset
S – Lvl Sel
S – Cnt Sel
SOG Sel
MENU Sel
Button Sel
PSOSD Sel
The values set in No. 5 LCD Data, return to the NEC factory settings
The adjustment of each individual RGB can be made impossible by the
adjustment of the Color level. In this case, the adjustment item of each
individual RGB is not displayed on the menu screen.
The adjustment that RGB is independent can be made impossible by the
adjustment of the Color level. In this case, the adjustment item that RGB is
independent is not displayed on the menu screen.
Select or non-select of Sync on Green and display or non-display of select
menu can be selected. When non-display is selected, Config is not
displayed.
* This item becomes effective only when the Hierarchical menu type is
But it becomes invalid when Toggle menu type is selected.
B (blue) or S (transparency) can be selected for the Background Color of the
OSD menu.
4 (SEL, UP, DOWN and EXIT) or 7 (SEL, UP, DPWN, RIGHT, LEFT, EXIT
Display or no display for Power Save OSD can be selected.
(For detail, see Page 29 INFORMARION DISPLAY BY OSD)
Input signal information is displayed.
The initial value of OSD display position can be changed.
C: Center UL: Upper left UR: Upper right DL: Down left DR: Down right
Used time in normal and Power save state is displayed.
Used time is recorded in every five minutes. But it is not recorded when
Power supply is cut off within five minutes.
All values are returned to NEC factory settings. It takes about seven
seconds.
Data Sheet EN0444EJ1V0DS00
Initial value: ON.
Initial value: ON.
Initial value (FUNC: Y; MENU: N)
Initial value: OFF
Initial value: C
selected.
Initial value: B
and RESET) number of adjustment switch can be selected.
Initial value: 7
ON : Individual adjustment is available.
OFF : Individual adjustment is impossible
ON : Individual adjustment is available.
OFF : Individual adjustment is impossible
• FUNC (Y: Sync on Green selection)
• MENU (Y: Select MENU display.)
(N: Sync on Green non-selection)
(N: Select MENU non-display.)
ON: Display
Function items
OFF: No display
NL10276AC28-01L

Related parts for NL10276AC28-01L