SCANSTA101 National Semiconductor Corporation, SCANSTA101 Datasheet - Page 13
SCANSTA101
Manufacturer Part Number
SCANSTA101
Description
Low Voltage Ieee 1149.1 Sta Master
Manufacturer
National Semiconductor Corporation
Datasheet
1.SCANSTA101.pdf
(32 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
SCANSTA101SM
Manufacturer:
Texas Instruments
Quantity:
10 000
Company:
Part Number:
SCANSTA101SM/NOPB
Manufacturer:
Texas Instruments
Quantity:
10 000
Company:
Part Number:
SCANSTA101SMX
Manufacturer:
Texas Instruments
Quantity:
10 000
Company:
Part Number:
SCANSTA101SMX/NOPB
Manufacturer:
Texas Instruments
Quantity:
10 000
SHIFTER
The Shifter block contains two 32-bit shift registers for
TDO_SM and TDI_SM respectively, and one 16-bit shift reg-
ister for TMS_SM. The TMS_SM shifter block diagram is
shown in Figure 2, the TDO_SM shifter block diagram is
shown in Figure 3, and the TDI_SM shifter block diagram is
shown in Figure 4.
Before the start of a vector processing the TMS_SM shifter is
loaded with the least significant 16 bits of the macro structure.
Based on the pre-shift TCK_SM count, the TMS_SM shifter
will skip (7 - pre-shift count) least significant bits. e.g., if the
pre-shift count is 4, the least significant 3 bits of the TMS_SM
Similarly, reading from TDI_SM memory can be accom-
plished by two consecutive reads. When reading from the
FIGURE 2. TMS_SM Shifter
FIGURE 3. TDO_SM Shifter
FIGURE 4. TDI_SM Shifter
13
shifter will not be used to drive TMS_SM during pre-shift.
Similarly, if the post-shift is less than 7 then, during post shift
only the number of bits equal to the post-shift count following
the macro structure bit 8 will be used to drive TMS_SM.
The STA101 memory is organized in big Endian format. Since
a memory write can be accomplished by two consecutive
writes to the same location when embedded software loads
the TDO_SM memory, it is assumed that the least significant
16 bits are written first and then the most significant 16 bits.
Therefore, when the Sequencer or a Vector is initialized the
SSIC can directly fetch and load the long word to the TDO_SM
shifter without any modification.
TDI_SM memory, the first read will contain the least signifi-
cant 16 bits and the second read the most significant 16 bits.
10121522
10121521
10121523
www.national.com