USB2640I Standard Microsystems Corp., USB2640I Datasheet - Page 45

• Manufacturer Part Number: USB2640I
• Description: Industrial Temperature Usb 2.0 Flash Media Controller And Usb Hub Combo
• Manufacturer: Standard Microsystems Corp.

Industrial Temperature USB 2.0 Flash Media Controller and USB Hub Combo
SMSC USB2640i/USB2641i
7.3.3.31
NUMBER
BIT
7:0
F2h: Port Remap 12
BYTE NAME
PRTR12
Port remap register for ports 1 & 2.
When a hub is enumerated by a USB Host Controller, the hub is only
permitted to report how many ports it has; the hub is not permitted to select
a numerical range or assignment. The Host Controller will number the
downstream ports of the hub starting with the number '1', up to the number
of ports that the hub reported having.
The host's port number is referred to as "Logical Port Number" and the
physical port on the hub is the “Physical Port Number". When remapping
mode is enabled (see PRTMAP_EN in Register 08h: Configuration Data
Byte 3) the hub's downstream port numbers can be remapped to different
logical port numbers (assigned by the host).
Note:
Bit [7:4]
Bit [3:0]
OEM must ensure that Contiguous Logical Port Numbers are used,
starting from number ‘1’ up to the maximum number of enabled
ports; this ensures that the hub's ports are numbered in accordance
with the way a host will communicate with the ports.
DATASHEET
Table 7.5 Port Remap Register for Ports 1 & 2
45
‘0000’
‘0001’
‘0010’
‘0011’
‘0100’
‘0000’
‘0001’
‘0010’
‘0011’
‘0100’
‘1111’
‘1111’
to
to
DESCRIPTION
Physical Port 2 is mapped to Logical Port 1
Physical Port 2 is mapped to Logical Port 2
Physical Port 2 is mapped to Logical Port 3
Physical Port 1 is mapped to Logical Port 1
Physical Port 1 is mapped to Logical Port 2
Physical Port 1 is mapped to Logical Port 3
Physical Port 2 is Disabled
Physical Port 1 is Disabled
Illegal; Do Not Use
Illegal; Do Not Use
Revision 2.0 (10-03-08)