CS8818 Myson Technology, CS8818 Datasheet

CS8818

Manufacturer Part Number

CS8818

Description

Interface and Interconnect USB

Manufacturer

Myson Technology

Datasheet

1.CS8818.pdf (2 pages)

Current page: 1 of 2
Download datasheet (152Kb)

FEATURES

• Fully compatible with USB specification 2.0

• Supports 5 endpoints

• Embedded USB 2.0 transceiver

• USB Mass Storage Class Bulk-Only

• Support Bus Powered and Self Powered modes

• Support multiple LUNs

• Automatic detection of Master or Slave ATAPI

• Support true ATAPI compatible interface

• ATAPI bus can be shared with other devices

• Embedded 8-bit microprocessor with on-chip 8K

• Flexible 32-bit I/O interfaces providing maximum

Taiwan:

No. 2, Industry East Rd. III,

Science-Based Industrial Park, Hsin-Chu, Taiwan

Tel: 886-3-5784866

yson Century, Inc.

Specification Compliant (Version 1.0)

devices

x 14 program ROM and optional external 16K x

14 program ROM/Flash memory

versatility with ROM mask changeable firmware

- Support full-speed (12M bits/sec) or

- Support USB 2.0 TEST mode features

- All endpoints share one on-chip 4K bytes SRAM

General Purpose USB2.0-to-ATAPI Bridge Controller with

high-speed (480M bits/sec) devices with

multiple configurations and multiple interfaces

Support all USB standard commands,

including suspend and resume detection logic

buffer and the size of each endpoint is

configurable

Default control endpoints (EP0) with up to

64-byte buffer on either TX or RX direction

An interrupt OUT endpoint (EP1) and an

interrupt IN endpoint (EP2)

A bulk OUT endpoint (EP3) and a bulk IN

endpoint (EP4): up to 512 bytes data payload for

full/high speed bulk endpoint

Unused endpoint can be disabled

Integrated bit stuffing/unstuffing and stuff

error detection

NRZI (Non-Return-to-Zero Inverted)

encoding/decoding

Complies with ATAPI-7 Specification (PIO

mode 0,3,4, Multiword DMA mode 0~2,

UDMA mode 0~6)

8-bit/16-bit Standard PIO mode interface

16-bit Multiword DMA mode and UDMA mode

interface (Ultra 133)

Fax: 886-3-5784349

Embedded PHY

USA:

4020 Moorpark Avenue, Suite 115

San Jose, CA, 95117

Tel: 408-243-8388 Fax: 408-243-3188

• Firmware to support ATAPI

• 12MHz external clock input to provide better

• Low power with operation voltage 3.3V with 5V

• Available in 64-pin LQFP (10mm x 10mm)

GENERAL DESCRIPTION

The CS8818 is a single chip USB (Universal Serial Bus)

2.0 Mass storage class peripheral controller intended for

use with standard ATAPI devices. The device consists of

a USB 2.0 PHY and SIE, FIFO buffers, embedded

microprocessor

ROM/Flash memory, and ATAPI compatible interface.

The CS8818 uses 12MHz crystal to reduce the EMI

issue. With flexible 32-bit I/O interface, the CS8818

can be programmed to fit different situations in the

USB 2.0 high speed mass storage class applications

such as CD-ROM, CD-RW, DVD-R and DVD-RW, etc.

CD-ROM/CD-RW/DVD-ROM/DVD-RW is

provided

EMI

tolerance I/O pads

production package and 128-pin QFP (14mm x

20mm) development package

with

expanded

sales@myson.com.tw

www.myson.com.tw

Rev. 1.0 April 2003

external

page 1 of 41

CS8818

program

Related parts for CS8818

CS8818 Summary of contents

Page 1

... QFP (14mm x 20mm) development package GENERAL DESCRIPTION The CS8818 is a single chip USB (Universal Serial Bus) 2.0 Mass storage class peripheral controller intended for use with standard ATAPI devices. The device consists of a USB 2.0 PHY and SIE, FIFO buffers, embedded ...

Page 2

... BLOCK DIAGRAM HS/ DP FS-TX USB UTMI 2.0 SIE Logic XCVR HS/ DM FS-RX Clock REF CGM Multiplier External Crystal Input USB Control Manager DIO Buffer Manager USB Packet Manager 8KB CLK SRAM CS8818 Embedded Program ROM 32-bit I/O Interface Micro- controller UDMA page ATAPI ...

Related keywords

CS8818 datasheet
CS8818 data sheet
CS8818 pdf datasheet
CS8818 component
CS8818 part
CS8818 distributor
CS8818 RoHS
CS8818 datasheet download