upd720112 Renesas Electronics Corporation., upd720112 Datasheet - Page 29

• Manufacturer Part Number: upd720112
• Description: Usb 2.0 Hub Controller
• Manufacturer: Renesas Electronics Corporation.

4.
representative.
µ
µ
PD720112GK-9EU:
PD720112GK-9EU-A:
Infrared reflow
Partial heating
Infrared reflow
Partial heating
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Soldering Method
Soldering Method
The
For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
RECOMMENDED SOLDERING CONDITIONS
µ
PD720112 should be soldered and mounted under the following recommended conditions.
Package peak temperature: 235°C, Time: 30 seconds max. (at 210°C or higher),
Count: Three times or less
Exposure limit: 3 days
Pin temperature: 300°C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 250°C, Time: 60 seconds max. (at 220°C or higher),
Count: Two times or less
Exposure limit: 3 days
Pin temperature: 300°C max., Time: 3 seconds max. (per pin row)
80-pin plastic TQFP (Fine pitch) (12 × 12)
80-pin plastic TQFP (Fine pitch) (12 × 12) Lead-free product
Note
Note
(after that, prebake at 125°C for 10 hours)
(after that, prebake at 125°C for 10 hours)
Data Sheet S16616EJ3V0DS
Soldering Conditions
Soldering Conditions
µ
PD720112
IR35-103-3
IR50-103-2
Symbol
Symbol
–
–
29