sm59d03g2c25 SyncMOS Technologies,Inc, sm59d03g2c25 Datasheet - Page 33

• Manufacturer Part Number: sm59d03g2c25
• Description: 8-bits Micro-controller 8kb+ Isp Flash & 1kb Ram Embedded
• Manufacturer: SyncMOS Technologies,Inc

9
The SM59D03G2 can perform ISP or In-Application Programming (IAP) function by putting the ISP
service code into the assigned ISP code area as shown in Table 9-1. One page of Flash memory is
512bytes.
There are three ways to enter the ISP code area. They are
(1) Blank first data：If the first Flash data is blank (data in address 0000h is FFh), the controller will
read it after power on and after identifying it as blank, the program counter will go to the ISP code
area.
(2) Execute the “LJMP” instruction in the program as IAP function.
(3) By hardware setting: After power on reset, if the hardware finds both Port2[6] and Port2[7] are
tied low, or Port4[3] is low, then the program counter will go to the ISP code area. This is shown in
Fig. 9-1.
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M030
ISP (In-System Programming)
Lock-bit number
Fig 9-1：ISP entering by hardware setting
1
2
3
4
5
6
7
8
Table 9-1： ISP code area
SM59D03G2
1.5K bytes (from $3A00h to $3FFF)
2.5K bytes (from $3600h to $3FFF)
3.5K bytes (from $3200h to $3FFF)
512 bytes (from $3E00h to $3FFF)
1K bytes (from $3C00h to $3FFF)
2K bytes (from $3800h to $3FFF)
3K bytes (from $3400h to $3FFF)
4K bytes (from $3000h to $3FFF)
33
ISP code area
8KB+ ISP Flash & 1KB RAM embedded
Ver.C SM59D03G2 07/2009
8-Bits Micro-controller
SM59D03G2