c15bc1 aptina, c15bc1 Datasheet - Page 27

• Manufacturer Part Number: c15bc1
• Description: Mt9d014 1/4-inch 2mp Cmos Digital Image Sensor
• Manufacturer: aptina

Serial Pixel Data Interface
PDF: 0526161444/Source:6112702771
MT0D014_DS - Rev. J 5/10 EN
The serial pixel data interface uses the following output-only signal pairs:
• DATA_P
• DATA_N
• CLK_P
• CLK_N
The signal pairs are driven differentially using sub-LVDS switching levels.
This interface conforms to the SMIA CCP2 requirements and supports both data/clock
signalling and data/strobe signalling.
The DATA_P, DATA_N, CLK_P, and CLK_N pads are turned off if the SMIA serial disable
bit is asserted (R0x301A–B[12] = 1) or when the sensor is in the soft standby state.
In data/clock mode, the clock remains HIGH when no data is being transmitted. In data/
strobe mode before frame start, clock is LOW and data is HIGH.
27
MT9D014: 1/4-Inch 2Mp CMOS Digital Image Sensor
Aptina reserves the right to change products or specifications without notice.
Control of the Signal Interface
©2007 Aptina Imaging Corporation. All rights reserved.
Preliminary