mc68hc908ap8cfa Freescale Semiconductor, Inc, mc68hc908ap8cfa Datasheet - Page 193

• Manufacturer Part Number: mc68hc908ap8cfa
• Description: M68hc08 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

12.5.3.4 Framing Errors
If the data recovery logic does not detect a logic 1 where the stop bit should be in an incoming character,
it sets the framing error bit, FE, in IRSCS1. The FE flag is set at the same time that the SCRF bit is set.
A break character that has no stop bit also sets the FE bit.
12.5.3.5 Baud Rate Tolerance
A transmitting device may be operating at a baud rate below or above the receiver baud rate.
Accumulated bit time misalignment can cause one of the three stop bit data samples to fall outside the
actual stop bit. Then a noise error occurs. If more than one of the samples is outside the stop bit, a framing
error occurs. In most applications, the baud rate tolerance is much more than the degree of misalignment
that is likely to occur.
As the receiver samples an incoming character, it resynchronizes the RT clock on any valid falling edge
within the character. Resynchronization within characters corrects misalignments between transmitter bit
times and receiver bit times.
Slow Data Tolerance
Figure 12-10
or a framing error. The slow stop bit begins at RT8 instead of RT1 but arrives in time for the stop bit data
samples at RT8, RT9, and RT10.
For an 8-bit character, data sampling of the stop bit takes the receiver
9 bit times × 16 RT cycles + 10 RT cycles = 154 RT cycles.
With the misaligned character shown in
the count of the transmitting device is 9 bit times × 16 RT cycles + 3 RT cycles = 147 RT cycles.
Freescale Semiconductor
shows how much a slow received character can be misaligned without causing a noise error
RECEIVER
RT CLOCK
RT8, RT9, and RT10
MC68HC908AP Family Data Sheet, Rev. 4
Samples
Table 12-4. Stop Bit Recovery
010
011
100
101
110
111
MSB
Figure
Figure 12-10. Slow Data
12-10, the receiver counts 154 RT cycles at the point when
Error Flag
Framing
SAMPLES
1
0
1
0
0
0
DATA
Noise Flag
STOP
1
1
1
1
1
0
SCI Functional Description
193