sak-xc167ci-32f40f-bb-a Infineon Technologies Corporation, sak-xc167ci-32f40f-bb-a Datasheet - Page 60

• Manufacturer Part Number: sak-xc167ci-32f40f-bb-a
• Description: 16-bit Single-chip Microcontroller
• Manufacturer: Infineon Technologies Corporation

6) An overload current (
7) The timing is valid for pin drivers operating in default current mode (selected after reset). Reducing the output
Parameter Interpretation
The parameters listed in the following partly represent the characteristics of the XC167
and partly its demands on the system. To aid in interpreting the parameters right, when
evaluating them for a design, they are marked in column “Symbol”:
CC (Controller Characteristics):
The logic of the XC167 will provide signals with the respective characteristics.
SR (System Requirement):
The external system must provide signals with the respective characteristics to the
XC167.
Data Sheet
current adds to the respective pin’s leakage current (
current and is defined by the overload coupling factor
compared to the polarity of the overload current that produces it.
The total current through a pin is |
voltage on analog inputs.
current may lead to increased delays or reduced driving capability (
I
OV
) through a pin injects a certain error current (
I
TOT
| = |
I
OZ
| + (|
I
OV
58
I
| ×
OZ
K
). The amount of error current depends on the overload
K
OV
OV
. The polarity of the injected error current is inverse
). The additional error current may distort the input
C
L
).
I
INJ
) into the adjacent pins. This error
Electrical Parameters
XC167CI-16F
Derivatives
V1.3, 2006-08