sak-c167cr-16rm ETC-unknow, sak-c167cr-16rm Datasheet - Page 9

• Manufacturer Part Number: sak-c167cr-16rm
• Description: Microcomputer Components 16-bit Cmos Single-chip Microcontrollers
• Manufacturer: ETC-unknow

Pin Definitions and Functions (cont’d)
Symbol
WR/
WRL
READY
ALE
EA
PORT0:
P0L.0 –
P0L.7,
P0H.0 -
P0H.7
Pin
Number
96
97
98
99
100 –
107
108,
111-117
Input (I)
Output (O)
O
I
O
I
I/O
20Dec96@09:25h Intermediate Version
Function
External Memory Write Strobe. In WR-mode this pin is
activated for every external data write access. In WRL-mode
this pin is activated for low byte data write accesses on a 16-
bit bus, and for every data write access on an 8-bit bus. See
WRCFG in register SYSCON for mode selection.
Ready Input. When the Ready function is enabled, a high
level at this pin during an external memory access will force
the insertion of memory cycle time waitstates until the pin
returns to a low level.
Address Latch Enable Output. Can be used for latching the
address into external memory or an address latch in the
multiplexed bus modes.
External Access Enable pin. A low level at this pin during and
after Reset forces the C167CR-16RM to begin instruction
execution out of external memory. A high level forces
execution out of the internal ROM. ROMless versions must
have this pin tied to ‘0’.
PORT0 consists of the two 8-bit bidirectional I/O ports P0L
and P0H. It is bit-wise programmable for input or output via
direction bits. For a pin configured as input, the output driver
is put into high-impedance state.
In case of an external bus configuration, PORT0 serves as
the address (A) and address/data (AD) bus in multiplexed bus
modes and as the data (D) bus in demultiplexed bus modes.
Demultiplexed bus modes:
Data Path Width:
P0L.0 – P0L.7:
P0H.0 – P0H.7:
Multiplexed bus modes:
Data Path Width:
P0L.0 – P0L.7:
P0H.0 – P0H.7:
7
8-bit
D0 – D7
I/O
8-bit
AD0 – AD7
A8 - A15
16-bit
D0 - D7
D8 - D15
16-bit
AD0 - AD7
AD8 - AD15
Semiconductor Group
C167CR-16RM