lpc11u23 NXP Semiconductors, lpc11u23 Datasheet - Page 33

• Manufacturer Part Number: lpc11u23
• Description: 32-bit Arm Cortex-m0 Microcontroller; Up To 32 Kb Flash; Up To 10 Kb Sram And 4 Kb Eeprom; Usb Device; Usart
• Manufacturer: NXP Semiconductors

NXP Semiconductors
[7]
[8]
[9]
[10] WAKEUP pin pulled HIGH externally. An external pull-up resistor is required on the RESET pin for the Deep power-down mode.
[11] Including voltage on outputs in 3-state mode.
[12] V
LPC11U2X
Product data sheet
[13] 3-state outputs go into 3-state mode in Deep power-down mode.
[14] Allowed as long as the current limit does not exceed the maximum current allowed by the device.
[15] To V
[16] Includes external resistors of 33   1 % on USB_DP and USB_DM.
USB_DP and USB_DM pulled LOW externally.
Low-current mode PWR_LOW_CURRENT selected when running the set_power routine in the power profiles.
IRC disabled; system oscillator enabled; system PLL enabled.
DD
SS
supply voltage must be present.
.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 13 January 2012
32-bit ARM Cortex-M0 microcontroller
LPC11U2x
© NXP B.V. 2012. All rights reserved.
33 of 70