ml70q5110la Oki Semiconductor, ml70q5110la Datasheet - Page 16

• Manufacturer Part Number: ml70q5110la
• Description: Bluetooth Baseband Controller Ic
• Manufacturer: Oki Semiconductor

USB Peripheral Circuit
Setting the UART Baud Rate
Setting the PCM-CVSD Transcoder
OKI Semiconductor
Please contact Oki Electric Industry Co., Ltd. when using USB.
Use the HCI_VS_Set_LC_Parameters command of the Vendor Specific Commands to set the UART
baud rate.
Available baud rate settings:
1200/2400/4800/7200/9600/19.2K/38.4K/56K/57.6K/115.2K/230.4K/345.6K/460.8K/921.6K
(Initial value is 115.2 kbps.)
Please use the HCI_VS_Set_LC_Parameters command of the Vendor Specific Commands in HCI to set
the PCM-CVSD transcoder parameters.
It is possible to set the following parameters using the VCCTL command:
- PCMSYNC/PCMCLK mode (in the input state after initialization)
- Mute reception (initial setting: OFF)
- Air coding
- Interface coding
- PCM format (data width of one PCM Linear sample)
- Serial interface format
- Application interface mode
8-bit (initial setting)/14-bit/16-bit
PCM Codec I/F (initial setting)/APB I/F
CVSD (initial setting)/ -law/A-law
Linear (initial setting)/ -law/A-law
Short frame (initial setting)/long frame
16/26
FEDL70Q5110LA-01
ML70Q5110LA