h5cx-l8sd Omron Corporation, h5cx-l8sd Datasheet - Page 44

• Manufacturer Part Number: h5cx-l8sd
• Description: Digital Timer
• Manufacturer: Omron Corporation

Operating Procedures
■ Setting Set Values
Set values can be set either as offset values (forecast value setting)
or absolute values. Set values are factory-set to forecast value set-
ting.
1. Move to Setting Method Selection Mode by turning ON the power
2. Select forecast value setting (
3. When the power is turned ON again, the Timer will start with the
Note 1: In Setting Method Selection Mode, outputs are OFF and the
Setting Method
Selection Mode
while pressing both the
(
selected setting method.
Run Mode
2: When the setting method is changed, the set values and
) using the
timer is stopped.
present value are reset to 0, and outputs are OFF.
Turn ON the power again.
Turn ON the power while
pressing the
4 Key.
Keys.
Key and
Key and
(Forecast value setting) (Absolute value setting)
) or absolute value setting
Change the setting method
using
4 Key at the same time.
Keys 1 to 6.
Timing stopped
Timing possible
Forecast Value Setting
• OUT1 (forecast output) turns ON when the present value reaches
• OUT2 (control output) turns ON when the present value reaches
• If the forecast set value ≥ set value, OUT1 (forecast output) will turn
Absolute Value Setting
• OUT1 (control output 1) turns ON when the present value reaches
• OUT2 (control output 2) turns ON when the present value reaches
Example: F-1 Mode
Example: F-1 Mode
Control output 2 (OUT 2)
Control output 1 (OUT1)
the forecast value.
The forecast value = set value − forecast set value
The forecast set value is used to set the deviation for the set value.
the set value.
ON as soon as timing starts.
set value 1.
set value 2.
Forecast
set value
Forecast output (OUT1)
Control output (OUT 2)
Set value 1
Set value 2
Forecast value
Set value
0
0
Present value
Present value
H5CX-B
44