h5cx-l8sd Omron Corporation, h5cx-l8sd Datasheet - Page 50

• Manufacturer Part Number: h5cx-l8sd
• Description: Digital Timer
• Manufacturer: Omron Corporation

Safety Precautions (H5CX-B)
■ Precautions for Safe Use
Changing the Set Value
When changing the set value during a timing operation, the output
will turn ON if the set value is changed as follows because of the use
of a constant read-in system:
Forecast Value Setting
When the present value ≥ the set value, OUT2 (control output) turns
ON. When the present value ≥ the forecast value (forecast value =
set value − forecast set value) OUT1 (forecast output) turns ON.
Absolute Value Setting
When the present value ≥ set value 2, OUT2 (control output 2) turns
ON. When the present value ≥ set value 1, OUT1 (control output 1)
turns ON.
■ Precautions for Correct Use
Operation with a Set Value of 0
When the set value is 0, the output turns ON the moment the signal
is input. The reset operation turns OFF the output.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
H5CX-B
50