h3ds-x Omron Corporation, h3ds-x Datasheet - Page 33

• Manufacturer Part Number: h3ds-x
• Description: Solid-state Timer
• Manufacturer: Omron Corporation

Installation of Screw-Less Clamp Models
■ Tools
A flat-blade screwdriver should be used to mount the cables.
Applicable Screwdriver
● Flat-blade, Parallel-tip, 2.5 mm diameter
Examples: FACOM AEF.2.5 × 75E
■ Applicable Wires
Applicable Wire Sizes
0.2 to 1.5 mm
Applicable Wire Type
Solid wires, stranded wires, flexible wires, or wires with ferules can
be used.
(See note 1) < 1.8 ≤ Diameter D (mm) ≤ 3.0 (see note 2)
Conductor diameter d (mm) or length of sides a and b (mm) ≤ 1.6
Note: 1. If the overall diameter of the wire is less than 1.8 mm, do not
2. If the overall diameter of the wire is over 2.8 mm, it will be
Wires with Ferules
OK
insert the wire past the conductor. Refer to the following di-
agrams.
difficult to use double wiring.
VESSEL No. 9900-(-)2.5 × 75
WAGO 210-119
WIHA 260/2.5 × 40
2
, AWG24 to AWG16
http://www.ia.omron.com/
NG
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
H3DS-@LC
33