upa2352 Renesas Electronics Corporation., upa2352 Datasheet - Page 7

no-image

upa2352

Manufacturer Part Number
upa2352
Description
Dual N-channel Mosfet
Manufacturer
Renesas Electronics Corporation.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
upa2352T1G-E4-A
Manufacturer:
TRIQUINT
Quantity:
360
Part Number:
upa2352T1P-E4-A
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
<Notes for using this device safely>
When you use this device, in order to prevent a customer’s hazard and damage, use it with understanding the
following contents. If used exceeding recommended conditions, there is a possibility of causing the device and
characteristic degradation.
1. This device is very thin device and should be handled with caution for mechanical stress. The rate of distortion
2. Please do not damage the device when you handle it. The use of metallic tweezers has the possibility of giving
3. When you mount the device on a substrate, carry out within our recommended soldering conditions of infrared
4. When you wash the device mounted the board, carry out within our recommended conditions. If washed
5. When you use ultrasonic wave to substrate after the device mounting, prevent from touching a resonance
6. When you coat the device after mounted on the board, please consult our company. NEC Electronics
7. Please refer to Figure 2 as an example of the Mounting Pad. Optimize the land pattern in consideration of
8. The marking side of this device is an internal electrode. Please neither contact with terminals of other parts nor
applied to the device should become below 2000 µε. If the rate of distortion exceeds 2000
a device may be degraded and it may result in failure.
the wound. And mounting with the nozzle with clean point is recommended.
reflow. If mounted exceeding the conditions, the characteristic of a device may be degraded and it may result
failure.
exceeding the conditions, the characteristic of a device may be degraded and it may result in failure.
directly. If it touches, the characteristic of a device may be degraded and it may result in failure.
recommends the epoxy resin of the semiconductor grade as a coating material.
density, appearance of solder fillets, common difference, etc in an actual design.
take out the electrode.
Data Sheet G17881EJ2V0DS
μ
ε, the characteristic of
μ
PA2352
7

Related parts for upa2352