hpmd-7905 Avago Technologies, hpmd-7905 Datasheet - Page 6

• Manufacturer Part Number: hpmd-7905
• Description: Fbar Duplexer For Us Pcs Band
• Manufacturer: Avago Technologies

6
Figure 13. Tape Drawing.
Figure 14. Reel Drawing.
13.00"
Notes:
1. All dimensions in mm.
2. 10 sprocket hole pitch accumulative tolerance ± 0.10 mm
3. Camber not exceed 1 mm in 250 mm
4. Pocket dimensions measured on a plane 0.3 mm above the bottom of the pocket.
5. Pocket depth measured from a plane on the inside bottom of the pocket to the top surface of the carrier.
6. Pocket position on relative to sprocket hole measure as true position of pocket, not the pocket hole.
R 6.26"
Notes:
1. All dimensions in mm, unless otherwise noted.
2. Material: polystyrene
3. Surface resistivity: 1x10
R 5:49"
+0.40"
R 6.26"
2.25 Note 5
0.030±0.05
-0"
+1.00"
-0.50"
12.20 Note 4
+1.00"
-0.50"
+1.00"
-0.50"
4.00 ± 0.10
9
Note 2
ohm-mm
CONVEX = 0.5mm
Note 4
6.60
2
φ
21.00±0.80
0.22"
120.00° ± 0.50°
12.00 ± 0.10
Note 6
2.00 ± 0.10
2.00 ± 0.50
φ
13.00"
+0.50"
-0.20"
R 2.00"
+1.00"
-0.50"
R 0.20"
φ1.50
R 2.00"
φ1.50 ± 0.10
R 5.27"
+1.00"
-0.50"
+1.00"
-0.50"
1.75 ± 0.1
11.50 ± 0.10
Note 6
2.20
100.00
24.00 ± 0.30
+2.00
-0