4455-LED-434-PER SILABS [Silicon Laboratories], 4455-LED-434-PER Datasheet - Page 5

• Manufacturer Part Number: 4455-LED-434-PER
• Manufacturer: SILABS [Silicon Laboratories]

2.3.4. Custom Parameters
As it was stated above user can store custom RF parameters into the devices with WDS. One custom field is
available in each node. If any of the three RF parameters (frequency, modulation, data rate) is set to custom both
the other parameters are configured to be custom as well.
Notes:
2.3.5. Default Demo Settings
The default demo settings are as follows:







The firmware drops an error message and continues with default parameters if no custom field is stored,
but custom parameter is selected.
The firmware goes to error state if the frequency band of the custom settings mismatches with the
frequency band of the device.
Frequency band: defined by the HW
Frequency number:
Node address: 5
Modulation: High precision GFSK
Data rate number: 1 (FSK: 9.6 kbps, OOK: 2.4 kbps)



Middle band: 1
High band—868 MHz: 2
High band—915 MHz: 4
Rev. 0.1
Si4455-2WayLink-DEMO
5