SST25VF010-20-4C-QA-DD029 SST [Silicon Storage Technology, Inc], SST25VF010-20-4C-QA-DD029 Datasheet - Page 12

• Manufacturer Part Number: SST25VF010-20-4C-QA-DD029
• Description: 1 Mbit SPI Serial Flash
• Manufacturer: SST [Silicon Storage Technology, Inc]

Data Sheet
Write-Enable (WREN)
The Write-Enable (WREN) instruction sets the Write-
Enable-Latch bit to 1 allowing Write operations to occur.
The WREN instruction must be executed prior to any Write
(Program/Erase) operation. CE# must be driven high
before the WREN instruction is executed.
Write-Disable (WRDI)
The Write-Disable (WRDI) instruction resets the Write-
Enable-Latch bit and AAI bit to 0 disabling any new Write
operations from occurring. CE# must be driven high before
the WRDI instruction is executed.
Enable-Write-Status-Register (EWSR)
The Enable-Write-Status-Register (EWSR) instruction
arms the Write-Status-Register (WRSR) instruction and
opens the status register for alteration. The Enable-Write-
Status-Register instruction does not have any effect and
will be wasted, if it is not followed immediately by the Write-
©2003 Silicon Storage Technology, Inc.
FIGURE 11: W
FIGURE 12: W
RITE
RITE
E
D
NABLE
ISABLE
(WREN) S
(WRDI) S
SCK
CE#
SCK
CE#
SO
SO
SI
SI
EQUENCE
EQUENCE
MODE 3
MODE 0
MODE 3
MODE 0
HIGH IMPEDANCE
HIGH IMPEDANCE
MSB
0 1 2 3 4 5 6 7
MSB
0 1 2 3 4 5 6 7
12
Status-Register (WRSR) instruction. CE# must be driven
low before the EWSR instruction is entered and must be
driven high before the EWSR instruction is executed.
04
06
1233 F12.1
1233 F11.1
1 Mbit SPI Serial Flash
SST25VF010
S71233-01-000
8/03