icx075al Sony Electronics, icx075al Datasheet - Page 14

• Manufacturer Part Number: icx075al
• Description: Diagonal 8mm Type 1/2 Progressive Scan Ccd Image Sensor With Square Pixel For Ccir B/w Video Cameras
• Manufacturer: Sony Electronics

6. Dark signal shading
7. Lag
8. Uniformity between output channels
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Adjust the signal output value generated by strobe light to 120mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/120)
Set to standard imaging condition I. Measure the signals at signal output 1 (V1) and at signal output 2 (V2),
and substitute the values into the following formula.
Vdt = Vdmax – Vdmin [mV]
V =
| V2 – V1 |
Strobe light
V1
Output
timing
FLD
SG
100 [%]
100 [%]
Light
Signal output 120mV
– 14 –
Vlag (lag)
ICX075AL