in74act192 Integral Corp., in74act192 Datasheet

no-image

in74act192

Manufacturer Part Number
in74act192
Description
Presettable Bcd/decade Up/down Counter
Manufacturer
Integral Corp.
Datasheet
Presettable BCD/Decade UP/DOWN Counter
High-Speed Silicon-Gate CMOS
HC/HCT192. The IN74ACT192 may be used as a level converter
for interfacing TTL or NMOS outputs to High Speed CMOS inputs.
Count Down Clock inputs. The direction of counting is determined
by which input is clocked. The outputs change state synchronous
with the LOW-to-HIGH transitions on the clock inputs. This counter
may be preset by entering the desired data on the P0, P1, P2, P3
input. When the Parallel Load input is taken low the data is loaded
independently of either clock input. This feature allows the counters
to be used as devide-by-n by modifying the count lenght with the
preset inputs. In addition the counter can also be cleared. This is
accomplished by inputting a high on the Master Reset input. All 4
internal stages are set to low independently of either clock input.Both
a Terminal Count Down (TC
Outputs are provided to enable cascading of both up and down
counting functions. The TC
when the counter underflows and TC
counter overflows. The counter can be cascaded by connecting the
TC
Count Down Clock inputs, respectively, of the next device.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 μA; 0.1 μA @ 25°C
• Outputs Source/Sink 24 mA
U
The IN74ACT192 is identical in pinout to the LS/ALS192,
The counter has two separate clock inputs, a Count Up Clock and
and TC
D
outputs of one device to the Count Up Clock and
D
output produces a negative going pulse
D
) and Terminal Count Up (TC
LOGIC DIAGRAM
PIN 8 = GND
U
PIN 16 =V
outputs a pulse when the
CC
U
)
ORDERING INFORMATION
T
TECHNICAL DATA
A
IN74ACT192N Plastic
PIN ASSIGNMENT
IN74ACT192D SOIC
= -40° to 85° C for all
IN74ACT192
packages
1

Related parts for in74act192

Related keywords