evqp6yb55 Panasonic Corporation of North America, evqp6yb55 Datasheet - Page 8

• Manufacturer Part Number: evqp6yb55
• Description: Light Touch Switch
• Manufacturer: Panasonic Corporation of North America

Classification
Part Name
6.7 Attentions Required for Mounting and Operating Condition
6.8 Repair･Service
6.6.2 Attentions Required for Bouncing and Chattering
6.7.2 Operating relative humidity
6.7.1 Operating temperature
6.7.3 The product is not a sealed type.
6.7.4 The structure of this product is not waterproof, chemicals resistance and solvent
6.7.5 Do not apply the vibration, the shock (drop, etc.) or the pressure to this product
6.7.6 Push strength
6.7.7 Avoid the use of the switch under pushed ON condition is continued for a long time.
6.8.1 When additional solder to the mounting soldering section of this product is to
6.8.2 Pay attention not to melt the insulation material or the resin section, and avoid
In order to prevent the malfunction by chattering caused by bounching at switch-operation
of ON/OFF and esternal vibration etc., please pay attention to the design shown below.
1) Read several times.
2)Set the delay time.
3)Set the CR integration circuit.
In order to assure the reliability, use this product within the operating
Avoid the use under following circumstance and conditions as it may affect a bad
deformation.
temperature range specified in the Specifications.
(Except applications considered appropriate countermeasure)
Avoid using this product in a place where it is directly exposed to the wheather,
or where humidity is high caused by steam and dew condensation, etc.
influence to characteristics.
(1) In the corrosive gas atmospere, such as Cl , H S, NH , NOx, SO gas.
(2) Waterdrop remained, dew condensation, Waterdrop adhered.
(3) In the solution of water, sale water, oil, chemicals, and organic solvents.
(4) A place where it is exposed to direct sunlight.
(5) A place with large amounts of dust or dirt particles.
resistance. Do not wet with water, chemicals and/or solvents.
be performed or soldering section is to be removed, pay attention not to apply
excessive stress and the temperature.
LIGHT TOUCH SWITCH
Do not use this product under relative humidity of 85% min. for a long time.
more than specified.
In order to avoid damages of the switch, do not apply the load to the operating
section more than specified.
(If the load is applied more than specified, it may affect on the characteristics
of the push stroke, etc.)
REFERENCE SPECIFICATION
Panasonic Electronic Devices Co., Ltd.
Part No.
EVQP6YB55
2
2
3
2
Issue No.
20090918
8/10