DS1075-100 DALLAS [Dallas Semiconductor], DS1075-100 Datasheet - Page 14

• Manufacturer Part Number: DS1075-100
• Description: EconOscillator/Divider
• Manufacturer: DALLAS [Dallas Semiconductor]

READ DATA TIME SLOT Figure 16
RETURN TO NORMAL OPERATION
When programming is complete the DS1075 should be powered down. If the pullup resistor on the
IN/OUT pin is removed, normal device operation will be restored next time power is applied.
DEFAULT REGISTER VALUES
Unless ordered from the factory with specific register program values, the DS1075 is shipped with the
following default register values:
DIV = 0 0000 0000 (Programmable divider will divide by two)
MUX = 0 0011 0100
OUT0 Disabled
Power-Down Enabled, Select Disabled
M = 4 (Ignored, see
DIV1 = 0 (N Dividers enabled)
E/
MSEL
I
= 0 (Internal oscillator selected)
= 1 (M prescaler bypassed)
MSEL
)
14 of 18