W25Q40BVSNIG WINBOND [Winbond], W25Q40BVSNIG Datasheet - Page 21

no-image

W25Q40BVSNIG

Manufacturer Part Number
W25Q40BVSNIG
Description
4M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
Manufacturer
WINBOND [Winbond]
Datasheet
W25Q40BV
8.2.7
Write Disable (04h)
The Write Disable instruction (Figure 6) resets the Write Enable Latch (WEL) bit in the Status Register to
a 0. The Write Disable instruction is entered by driving /CS low, shifting the instruction code “04h” into the
DI pin and then driving /CS high. Note that the WEL bit is automatically reset after Power-up and upon
completion of the Write Status Register, Erase/Program Security Registers, Page Program, Quad Page
Program, Sector Erase, Block Erase and Chip Erase instructions.
Write Disable instruction can also be used to invalidate the Write Enable for Volatile Status Register
instruction.
Figure 6. Write Disable Instruction Sequence Diagram
Publication Release Date: July 08, 2010
- 21 -
Preliminary - Revision B

Related parts for W25Q40BVSNIG