M58LW032C110ZA6 STMICROELECTRONICS [STMicroelectronics], M58LW032C110ZA6 Datasheet - Page 15

• Manufacturer Part Number: M58LW032C110ZA6
• Description: 32 Mbit 2Mb x16, Uniform Block, Burst 3V Supply Flash Memory
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

bits CR2-CR0). In Synchronous Continuous Burst
Read mode one Burst Read operation can access
the entire memory sequentially. If the starting ad-
dress is not associated with a page (4 Word)
boundary the Valid Data Ready, R, output goes
Low, V
in time and additional wait-states are required. The
Valid Data Ready output timing (bit CR8) can be
changed in the Configuration Register.
The order of the data output can be modified
through the Burst Type bit in the Configuration
IL
, to indicate that the data will not be ready
Register. The burst sequence can be sequential or
interleaved.
See Table 20, Synchronous Read AC Character-
istics and Figure 18 and 19, Synchronous Burst
Read AC Waveform for details.
Single Synchronous Read. Single
nous Read operations are similar to Synchronous
Burst Read operations except that only the first
data output after the X latency is valid. Single Syn-
chronous Reads are used to read the Status Reg-
ister,
Protection Status.
CFI, Electronic
Signature
M58LW032C
and
Synchro-
Block
15/61