VRE306 CIRRUS [Cirrus Logic], VRE306 Datasheet - Page 4
![no-image](/images/no-image-200.jpg)
VRE306
Manufacturer Part Number
VRE306
Description
Precision Voltage Reference
Manufacturer
CIRRUS [Cirrus Logic]
Datasheet
1.VRE306.pdf
(4 pages)
VRE306
The proper connection of the VRE306 series voltage references with the optional trim resistor for initial error and
the optional capacitor for noise reduction is shown below. The VRE306 reference has the ground terminal brought
out on two pins (pin 4 and pin 7) which are connected together internally. This allows the user to achieve greater
accuracy when using a socket. Voltage references have a voltage drop across their power supply ground pin due to
quiescent current flowing through the contact resistance. If the contact resistance was constant with time and tem-
perature, this voltage drop could be trimmed out. When the reference is plugged into a socket, this source of error
can be as high as 20 ppm. By connecting pin 4 to the power supply ground and pin 7 to a high impedance ground
point in the measurement circuit, the error due to the contact resistance can be eliminated. If the unit is soldered
into place, the contact resistance is sufficiently small that it does not effect performance. Pay careful attention to the
circuit layout to avoid noise pickup and voltage drops in the lines.
EXTERNal CONNECTIONS
CONTaCTING CIRRuS lOGIC SuPPORT
For all Apex Precision Power product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact tucson.support@cirrus.com.
International customers can also request support by contacting their local Cirrus Logic Sales Representative.
To find the one nearest to you, go to www.cirrus.com
IMPORTANT NOTICE
Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject
to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant
information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale
supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus
for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third
parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights,
copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives con-
sent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent
does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROP-
ERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE
SUITABLE FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PROD-
UCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUS-
TOMER’S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE
CUSTOMER OR CUSTOMER’S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES,
BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL
LIABILITY, INCLUDING ATTORNEYS’ FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
Cirrus Logic, Cirrus, and the Cirrus Logic logo designs, Apex Precision Power, Apex and the Apex Precision Power logo designs are trademarks of Cirrus Logic, Inc.
All other brand and product names in this document may be trademarks or service marks of their respective owners.
OPTIONAL
NOISE REDUCTION
CAPACITOR
C
1µF
N
REF. GND
8
+ V
VRE306
2
7
IN
4
V
3
TEMP OUT
5
6
OPTIONAL
FINE TRIM
ADJUSTMENT
10kW
+ V
OUT
P r o d u c t I n n o v a t i o n F r o m
PIN CONFIGuRaTION
TEMP
GND
N/C
+V
IN
4
1
2
3
VRE306
VIEW
TOP
8
7
6
5
NOISE
REDUCTION
REF. GND
TRIM
V
OUT
VRE306DS