MC9S12D32 MOTOROLA [Motorola, Inc], MC9S12D32 Datasheet - Page 2

• Manufacturer Part Number: MC9S12D32
• Description: 16-Bit Microcontroller
• Manufacturer: MOTOROLA [Motorola, Inc]

• Analog-to-Digital Converters
• Up to five 1M bit per second, CAN 2.0 A, B software compatible modules
• Enhanced Capture Timer (ECT)
• 8 PWM channels with programmable period and duty cycle (7 channels on 80 Pin Packages)
• Serial interfaces
• SAE J1850 Compatible Module (BDLC)
• SIM (System Integration Module)
• Clock generation
• Operating frequency for ambient temperatures T
• Internal 5V to 2.5V Regulator
• 112-Pin LQFP or 80-Pin QFP package
• Development support
2
MOTOROLA
— One or two 8-channel modules with 10-bit resolution depending on the package option
— External conversion trigger capability
— Five receive and three transmit buffers
— Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit
— Four separate interrupt channels for Receive, Transmit, Error and Wake-up
— Low-pass filter wake-up function in STOP mode
— Loop-back for self test operation
— 16-bit main counter with 7-bit prescaler
— 8 programmable input capture or output compare channels; 4 of the 8 input captures with buffer
— Input capture filters and buffers, three successive captures on four channels, or two captures on four
— Four 8-bit or two 16-bit pulse accumulators
— 16-bit modulus down-counter with 4-bit prescaler
— Four user-selectable delay counters for signal filtering
— 8-bit, 8-channel or 16-bit, 4-channel
— Separate control for each pulse width and duty cycle
— Center- or left-aligned outputs
— Programmable clock select logic with a wide range of frequencies
— Two asynchronous serial communications interfaces (SCI)
— Up to three synchronous serial peripheral interfaces (SPI)
— IIC
— 10.4 kbps Variable Pulse Width format
— Byte level receive and transmit
— 4x receive mode supported
— CRG (windowed COP watchdog, real time interrupt, clock monitor, clock generation and reset)
— MEBI (multiplexed external bus interface)
— INT (interrupt control)
— Phase-locked loop clock frequency multiplier
— Limp home mode in absence of external clock
— Clock Monitor
— Low power 0.5 to 16 MHz crystal oscillator reference clock
— 50MHz equivalent to 25MHz Bus Speed for single chip
— I/O lines with 5V input and drive capability
— 5V A/D converter inputs and 5V I/O
— 2.5V logic supply
— Single-wire background debug™ mode (BDM)
— On-chip hardware breakpoints
channels with a capture/compare selectable on the remaining four
40MHz equivalent to 20MHz Bus Speed in expanded bus modes.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
A
-40°C <= T
PRODUCT PROPOSAL, Rev 6.1, 23-Oct-02
A
<= 125°C
MC9S12D-Family