WM8768_10 WOLFSON [Wolfson Microelectronics plc], WM8768_10 Datasheet - Page 23

• Manufacturer Part Number: WM8768_10
• Description: 24-bit, 192kHz 8-Channel DAC
• Manufacturer: WOLFSON [Wolfson Microelectronics plc]

Production Data
w
SOFTMUTE
The digital muting function used in Software and Hardware mode applies a softmute with the
operating characteristics shown in Figure 19.
Figure 19 Soft Mute Operation
When the softmute is applied the output of the device will decay towards V
approximately 64 input samples. When the mute is released, either manually or automatically by the
chip, the output will restart immediately from the current input sample.
ANALOGUE MUTE
Analogue mute can only be used in software mode and will cause the output of the selected DAC to
perform an analogue mute that clamps the output of the DAC to VMID. This function is dependent in
the IZD bit which is described in section INFINITE ZERO DETECT, later.
-0.5
-1.5
-2.5
1.5
0.5
-1
-2
1
0
0
0.001
0.002
Time(s)
0.003
0.004
0.005
MID
with a time constant of
PD Rev 4.3 July 2010
WM8768
0.006
23