ZL50062 ZARLINK [Zarlink Semiconductor Inc], ZL50062 Datasheet - Page 3
![no-image](/images/no-image-200.jpg)
ZL50062
Manufacturer Part Number
ZL50062
Description
16K-Channel Digital Switch with High Jitter Tolerance, Single Rate (2, 4, 8, or 16Mbps), and 64 Inputs and 64 Outputs
Manufacturer
ZARLINK [Zarlink Semiconductor Inc]
Datasheet
1.ZL50062.pdf
(68 pages)
Device Overview
The ZL50062 and ZL50064 are two different packages of the same device. They have the same functionality
except that ZL50064 does not have 16.384MHz output clock and frame pulse (C16o and FP16o) due to package
differences. The ZL50062/4 has two data ports, the Backplane and the Local port. The device can operate at four
different data rates, 2.048Mbps, 4.096Mbps, 8.192Mbps or 16.384Mbps. All 64 input and 64 output streams must
operate at the same data rate.
The ZL50062/4 contains two data memory blocks (Backplane and Local) to provide the following switching path
configurations:
•
•
•
•
•
The device contains two connection memory blocks, one for the Backplane output and one for the Local output.
Data to be output on the serial streams may come from either of the data memories (Connection Mode) or directly
from the connection memory contents (Message Mode).
In Connection Mode, the contents of the connection memory define, for each output stream and channel, the
source stream and channel (stored in data memory) to be switched.
In Message Mode, microprocessor data can be written to the connection memory for broadcast on the output
streams on a per channel basis. This feature is useful for transferring control and status information to external
circuits or other ST-BUS devices.
The device uses a master frame pulse (FP8i) and master clock (C8i) to define the input frame boundary and timing
for both the Backplane port and the Local port. The device will automatically detect whether an ST-BUS or a GCI-
Bus style frame pulse is being used. There is a two-frame delay from the time RESET is de-asserted to the
establishment of full switch functionality. During this period, the input frame pulse format is determined before
switching begins.
The device provides FP8o, FP16o, C8o and C16o outputs to support external devices connected to the outputs of
the Backplane and Local ports.
A non-multiplexed Motorola microprocessor port allows programming of the various device operation modes and
switching configurations. The microprocessor port provides access for Register read/write, Connection Memory
read/write and Data Memory read-only operations. The port has a 15-bit address bus, 16-bit data bus and 4 control
signals. The microprocessor may monitor channel data in the Backplane and Local data memories.
The mandatory requirements of the IEEE-1149.1 (JTAG) standard are fully supported via a dedicated test port.
The ZL50062 and ZL50064 are each available in one package:
•
•
Input-to-Output Unidirectional, supporting 16K x 16K switching
Backplane-to-Local Bi-directional, supporting 8K x 8K data switching,
Local-to-Backplane Bi-directional, supporting 8K x 8K data switching,
Backplane-to-Backplane Bi-directional, supporting 8K x 8K data switching.
Local-to-Local Bi-directional, supporting 8K x 8K data switching.
ZL50062: a 17mm x 17mm body, 1mm ball-pitch, 256-PBGA.
ZL50064: a 28mm x 28mm body, 0.40mm pin-pitch, 256-LQFP.
Zarlink Semiconductor Inc.
ZL50062/4
3
Data Sheet