LA75503V_07 SANYO [Sanyo Semicon Device], LA75503V_07 Datasheet - Page 9
![no-image](/images/no-image-200.jpg)
LA75503V_07
Manufacturer Part Number
LA75503V_07
Description
For PAL TV/VCR Adjustment Free VIF/SIF Signal Processing IC
Manufacturer
SANYO [Sanyo Semicon Device]
Datasheet
1.LA75503V_07.pdf
(15 pages)
Continued from preceding page.
Pin No.
11
12
13
14
15
SYSTEM SW [A]
SYSTEM SW [B]
VCO COIL
REF OSC
Pin name
Use a tuning capacitance of 24pF.
Use L and C specifications that are accurate to
±2%. Also, design the L and C values so that the
voltage of pin 10 is 3.6V when PLL is locked while
using the IF center frequency.
This is the system switch pin.
The transistor turns ON when the pin voltage from
the circuit becomes approx. 1.4V.
pin and IF switch.
The 38MHz mode is selected by inserting 220kΩ
between pin 15 and GND, the 38.9MHz mode by
leaving the pin open, and the 39.5MHz mode by
inserting 220kΩ between pin 15 and V CC .
4MHz input is possible from this pin.
In the case of 4MHz external input, input 86dBµ
This is the VCO tank circuit for the PLL detector.
This pin can be used both as the crystal resonator
Pin function
LA75503V
Equivalent circuit
Continued on next page.
No.6804-9/15