ADC-8032A ETC [List of Unclassifed Manufacturers], ADC-8032A Datasheet - Page 18

• Manufacturer Part Number: ADC-8032A
• Description: Analog Composite to SDI Decoder
• Manufacturer: ETC [List of Unclassifed Manufacturers]

3-4 • User Controls
Troubleshooting Checklist
Routine maintenance to this RossGear product is not required. In the event of problems with your
ADC-8032A, the following basic troubleshooting checklist may help identify the source of the
problem. If the module still does not appear to be working properly after checking all possible
causes, please contact your Ross Video products distributor, or the Ross Video Technical Support
department at the numbers listed under the “Contact Us” section at the end of this manual.
1. Visual Review – Performing a quick visual check may reveal many problems,
2. Power Check – Check the power indicator LED on the distribution frame front
3. Reseat the Card in the Frame – Eject the card and reinsert it in the frame.
4. Check Control Settings – Refer to the Installation and Operation sections of
5. Input Signal Status – Verify that source equipment is operating correctly and
6. Output Signal Path – Verify that destination equipment is operating correctly
7. Module Exchange – Exchanging a suspect module with a module that is known
such as connectors not properly seated or loose cables. Check the module, the
frame, and any associated peripheral equipment for signs of trouble.
panel for the presence of power. If the power LED is not illuminated, verify that
the power cable is connected to a power source and that power is available at
the power main. Confirm that the power supplies are fully seated in their slots.
If the power LED is still not illuminated, replace the power supply with one that
is verified to work.
the manual and verify all user-component settings including correct BNC
designations.
that a valid signal is being supplied.
and receiving a valid signal.
to be working correctly is an efficient method for localizing problems to
individual modules.
ADC-8032A User Manual (Iss. 04)