ADC-8032A ETC [List of Unclassifed Manufacturers], ADC-8032A Datasheet - Page 25

• Manufacturer Part Number: ADC-8032A
• Description: Analog Composite to SDI Decoder
• Manufacturer: ETC [List of Unclassifed Manufacturers]

ADC-8032A User Manual (Iss. 04)
Bank
Bank
Note
Note
A
A
SW1 Function Select
SW1 Function Select
Bank A-8: Video Gain
Use the following steps to adjust the ADC-8032A’s output video gain:
Bank A-9: Black Level Offset
Use the following steps to change the card’s output black level. This setting is a black level offset that
is not affected by the NTSC Setup function (Bank B, Position 1). For example, with Black Level
Offset at 1 IRE and NTSC Setup off, the black level will be 1 IRE. With NTSC Setup on and a setup
level of 7.5 IRE, the black level will be 8.5 IRE.
8
9
Video Gain is one of the six “Proc Amp” controls that can be
reset using Factory Defaults (Bank A, Position E).
Black Level Offset is one of the six “Proc Amp” controls that
can be reset using Factory Defaults (Bank A, Position E).
1. Select Bank A, and rotate Function Select to position 8.
2. Adjust video gain up or down as required:
1. Select Bank A, and rotate Function Select to position 9.
2. Choose the desired Black Level Offset setting:
•
•
•
•
•
•
•
•
+
-
+
-
Toggle Mode Select up to increase video gain.
Hold Mode Select up to increase video gain continuously.
Toggle Mode Select down to decrease video gain.
Hold Mode Select down to decrease video gain continuously.
Toggle Mode Select up to increase the black level offset.
Hold Mode Select up to increase the black level offset continuously.
Toggle Mode Select down to decrease the black level offset.
Hold Mode Select down to decrease the black level offset continuously.
SW2 Mode Select
SW2 Mode Select
Increase
Decrease
Increase
Decrease
VID GAIN
BLK OFF
Heads-Up Display Label
Heads-Up Display Label
(###.#)%
(##.#) IRE
Using Banks • 4-7
Default
Default
100%
0 IRE