FC-2104 GAMEWELL-FCI [Gamewell-FCI by Honeywell], FC-2104 Datasheet

no-image

FC-2104

Manufacturer Part Number
FC-2104
Description
TWO-ZONE PANEL
Manufacturer
GAMEWELL-FCI [Gamewell-FCI by Honeywell]
Datasheet
tile, two-zone control with space to accommodate an op-
tional digital communicator. It meets the requirements of
NFPA Standard 72 for Central Station, Protected Premises,
and Remote (DACT) Supervising Station Fire Alarm Sys-
tems. It is Listed to UL Standard 864, inherently power lim-
ited and meets all UL transient immunity requirements.
effective approach to systems design, and allow a great de-
gree of flexibility in one enclosure. These features include
two (2) Class B, Style B initiating circuits and two (2) Class
B, Style Y notification appliance circuits, rated at 1.25 amps
each. Notification appliance circuits can be configured as
silenceable or non-silenceable.
the need for computers and associated software.
waterflow switches.
dow offering a view of LEDs displaying the status of vital
functions. The surface mounted enclosure, with its slim ap-
pearance (3 3/8-inch depth) is designed to blend with any en-
vironment. Space is available for two (2) B-7R batteries.
tional switches and standby batteries is provided.
of selectable transmission formats to communicate to most
central stations. Other features of the communicator are: A
line-active indicator for each of two phone lines, “Kiss-Off”
signal LED, dual “low telephone voltage detect” circuitry
and programmable event codes per format. The FC-2224 is
programmable for AC power loss delay required for DACT
operation.
annunciation to as many as four (4) Model FC-2866 remote
annunciators.
which provides 34 pre-defined open collector outputs that
can be used to drive LEDs or relays.
The FC-2224 Fire Alarm Control panel is a proven, versa-
The many features of the FC-2224 control provide a cost
DIP switch programming is used throughout, eliminating
A time delay of 30, 60, or 90 seconds is available for
The control is housed in a red steel enclosure with a win-
Supervision of vital components, plug-in modules, func-
The optional digital communicator includes a wide range
An optional serial annunciator driver allows remote alarm
Other optional modules include the FC-2880 I/O module
struments, Inc. for their use. Specifications subject to change without notice.
Specifications are provided for information only, are not intended to be used for installation purposes, and are believed to be accurate. However, no responsibility is assumed by Fire Control In-
16 Southwest Park, Westwood, MA 02090 USA TEL: (781) 471-3000 FAX: (781) 471-3099
UL
CSFM
AGENCY APPROVALS
DESCRIPTION
S1869
Approved
An ISO 9001 Certified Company
CONVENTIONAL FIRE ALARM CONTROL
Inherently Power Limited
DIP Switch Programming
Choice of Output Patterns Including
ANSI S3.41
Programmable Time Delay for
Waterflow Switches
Periodic Trouble Reminder
Walk Test Feature
Optional Digital Communicator with
Multiple Reporting Formats
Serial Annunciator Output (Optional)
Surface Mount Technology
TWO-ZONE PANEL
FC-2224
FEATURES
© 2000 All Rights Reserved
9020-0483/Ver. 1.5

Related parts for FC-2104

FC-2104 Summary of contents

Page 1

... DESCRIPTION The FC-2224 Fire Alarm Control panel is a proven, versa- tile, two-zone control with space to accommodate an op- tional digital communicator. It meets the requirements of NFPA Standard 72 for Central Station, Protected Premises, and Remote (DACT) Supervising Station Fire Alarm Sys- tems Listed to UL Standard 864, inherently power lim- ited and meets all UL transient immunity requirements ...

Page 2

... Cabinet for FC-2104 DACT (optional) Programmer for FC-2104 DACT Cable w/spade lugs for connection to Telco RJ31X plug. (Optional) Quick connect cable to connect 5230 Programmer to FC-2104 DACT Replacement PC board UL Listed EOL resistor 120 VAC Transformer (replacement) 230 VAC Transformer (optional) FC-2104 Digital Alarm ...

Related keywords