88-00151-00 Murata Wireless Solutions, 88-00151-00 Datasheet - Page 6

• Manufacturer Part Number: 88-00151-00
• Description: WiFi / 802.11 Modules SN8200 Wifi Network Controller Module
• Manufacturer: Murata Wireless Solutions

Specifications of 88-00151-00

• Rohs: yes
• Protocol Supported: 802.11 b/g/n
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps
• Interface Type: I2C, SPI, UART
• Transmit Power (max): 18 dBm
• Antenna Connector Type: On-board
• Operating Supply Voltage: 3.3 V
• Supply Current Transmitting: 370 mA
• Supply Current Receiving: 110 mA
• Maximum Operating Temperature: + 85 C
• Dimensions: 30.5 mm x 19.4 mm x 2.8 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: CCK, DSSS
• Tradename: SyNode

1 System Descriptions
1.1
SN8200 is a complete low power self-contained embedded wireless solution to address the
connectivity demand in M2M applications. It integrates micro-controller, Wi-Fi BB/MAC/RF IC,
RF front end, clocks, and on-board antenna into a small form factor module. SN8200 can be
controlled by a host device through a serial interface; it can also serve as a standalone Wi-Fi
station or network controller. Thus, it can be used to enable wireless connectivity to the simplest
products with minimal engineering resources.
The SN8200 provides standard IEEE802.11 b/g/n functions. The integrated MCU supports
Broadcom WICED™ software. It can be used for a variety of different applications, such as
wireless sensor node, serial to Wi-Fi transceiver, Wi-Fi network controller, Wi-Fi gateway/bridges
plus internet server.
When used in a system where the SN8200 is controlled by a host CPU, the serial host interface
makes it very easy to integrate. When used in a system without a host CPU, the integrated ARM
Cortex-M3 can be used to run a variety of applications.
The SN8200 Wi-Fi module can be used for Wi-Fi gateway if combined with other radio module.
For example, one can design a Zigbee Wi-Fi gateway by combine SN8200 with SyChip SN3020
Zigbee module. SyChip provides a reference design to enable the OEM customer. This gateway
design can be used for low cost and low power consumption applications like Home Area
Networks.
1.2
•
• Dimension: 30.5 mm × 19.4 mm × 2.8 mm
• On-board antenna
• Transmit power: +18 dBm @ 11b /11Mbps
• Max receive sensitivity: -96dBm
• MCU: ARM Cortex-M3
• Diverse serial interface: UART, SPI
• Sensor applications support: ADC, DAC, I2C, GPIO
• Operating temperature range: -30ºC to 85ºC
• RoHS compliant
• MSL Level 3
• FCC/IC certified; CE compliant
2.4GHz IEEE 802.11b/g/n radio technology
Applications
Module Summary
Page 6 of 29
SN8200 User Manual and Datasheet v1.1