ES-U-2016-RM EasySync, ES-U-2016-RM Datasheet - Page 11

• Manufacturer Part Number: ES-U-2016-RM
• Description: USB Interface IC USB to 16 Ports RS422/RS485, Metal
• Manufacturer: EasySync

Windows CE
Windows CE
Operating
Mac OS X
Windows*
4.2-5.2**
System
Linux
6.0
Option2 - Driver Executable
If you computer will not be connected to the internet during installation, use the following
instructions to install the driver. If you have already completed steps (a) to (g) in the Windows
Update section above, jump to step 3 below as the driver is already installed.
a. Download the latest version of the driver setup executable file from the following link.
b. Double-click the exe file to run the driver installation.
c.
d. Connect the power supply cable to the power inlet socket on the rear panel of the
e. Connect the USB cable to your converter and the other end to a USB port on your PC.
f.
g. Then proceed to step 3 below to verify the installation.
2011-04-
2009-05-
2011-02-
2010-02-
2010-02-
Release
Version 2.08.14 was the latest driver executable available when this manual was
published (as circled below), but please check the link to the driver page below before
installing your converter and use the latest version.
Note that if you wish to install the converter on a computer which is never connected to
the internet, you can download the file using another computer and use a USB flash drive
or similar to copy the file over to the computer which will be used with the converter.
The following window will appear. It will disappear when installation is complete.
converter, and connect the adapter to an AC power outlet.
The computer will recognise the converter and will complete the installation of the
converter and the associated serial ports.
Date
12
14
28
11
11
x86 (32-
2.08.14
1.1.0.6
1.1.0.6
2.2.16
1.5.0
bit)
x64 (64-
2.08.14
Figure 11
2.2.16
1.5.0
bit)
Figure 10
-
-
©2010 - 2011 EasySYNC Ltd.
http://www.ftdichip.com/Drivers/VCP.htm
Processor Architecture
2.2.16
PPC
-
-
-
-
1.1.0.6 1.1.0.6
1.1.0.6 1.1.0.6
ARM
Driver installation window
-
-
-
Driver download from FTDI website
MIPSII MIPSIV
-
-
-
1.1.0.6
1.1.0.6
-
-
-
Document Reference No.: ES_000061
1.1.0.6
1.1.0.6
SH4
-
-
-
USB to Serial Converters Manual
Included in 2.6.31 kernel and later
Available as
Customers wishing to have a
should
VID/PID combination added
Clearance No.: ES
WHQL Certified
Release notes
contact FTDI Support
Comments
ReadMe
setup executable
Version 1.2
# 35
11