ES-U-2016-RM EasySync, ES-U-2016-RM Datasheet - Page 34

• Manufacturer Part Number: ES-U-2016-RM
• Description: USB Interface IC USB to 16 Ports RS422/RS485, Metal
• Manufacturer: EasySync

7.2
Normally, the driver should be installed using one of the methods described in section 4 (on page 10). If
these were not successful, you can install the driver manually as shown below.
Windows CE
Windows CE
Operating
Mac OS X
Windows*
4.2-5.2**
System
1. First, configure your DIP switches/jumpers as detailed in section 5.
2. Create a folder on your computer with a name such as EasySync Driver
3. Download the latest USB driver zip file from the driver website link below, and save it in the
4. Un-zip the file to the same folder. The following Windows XP screen shots show the zip file being
Linux
6.0
Manual Installation of Driver
If your application is receiving additional unexpected zero bytes, the biasing resistors can be
enabled to resolve this. Section 5 gives details of how to enable the biasing resistors for each
model of converter. Note that ES-U-2xxx converters with plastic enclosures do not have internal
biasing resistors and so these would need to be fitted externally.
Some application programs cannot work with the Echo enabled. This can be resolved by disabling
the Echo option using the DIP switches or jumpers (depending on model of converter). Section 5
gives details of how to select RS-485 mode without Echo.
folder which you have created. Version 2.08.14 was the latest version of the driver zip file when
this manual was published (as shown in Figure 20), but newer drivers may be available in future.
Please check the link below for newer drivers, and always use the latest version available.
Note: If you wish to install the converter on a computer which is never connected to the internet,
you can download the file using another computer and use a USB flash drive or similar to copy
the file over to the computer which will be used with the converter.
extracted to a folder. The Windows Compressed Folders wizard was used in the example below.
The un-zip process may be slightly different from the one shown below if you are using a
different utility.
2011-04-
2009-05-
2011-02-
2010-02-
2010-02-
Release
Date
12
14
28
11
11
x86 (32-
2.08.14
1.1.0.6
1.1.0.6
2.2.16
Figure 20
1.5.0
bit)
http://www.ftdichip.com/Drivers/VCP.htm
x64 (64-
2.08.14
2.2.16
1.5.0
bit)
-
-
©2010 - 2011 EasySYNC Ltd.
Processor Architecture
Driver download from FTDI website
2.2.16
PPC
-
-
-
-
1.1.0.6 1.1.0.6
1.1.0.6 1.1.0.6
ARM
-
-
-
MIPSII MIPSIV
-
-
-
1.1.0.6
1.1.0.6
-
-
-
Document Reference No.: ES_000061
1.1.0.6
1.1.0.6
SH4
-
-
-
USB to Serial Converters Manual
Included in 2.6.31 kernel and later
Available as
Customers wishing to have a
should
VID/PID combination added
Clearance No.: ES
WHQL Certified
Release notes
contact FTDI Support
Comments
ReadMe
setup executable
Version 1.2
# 35
34