UMFT231XE-01 FTDI, UMFT231XE-01 Datasheet - Page 12

• Manufacturer Part Number: UMFT231XE-01
• Description: Interface Development Tools USB to UART DIP Dev. Module
• Manufacturer: FTDI
• Type: USB to UARTr
• Series: FT231Xr

Specifications of UMFT231XE-01

• Rohs: yes
• Product: Development Modules
• Tool Is For Evaluation Of: FT231XQ
• Interface Type: I2C, UART, USB
• Operating Supply Voltage: 3.3 V
• Description/function: USB to UART evaluation module
• Dimensions: 29.02 mm x 19.24 mm x 9.2 mm
• Operating Supply Current: 1 A
• Factory Pack Quantity: 25
• For Use With: FT231XQ

5.6
Figure 5.5 – USB Self Powered 3.3V Logic Drive
The FT231X can be powered from a single 3.3V supply. This feature is an alternative to having the
FT231X powered at 5V in standard self-powered configuration.
The 3.3V Self Powered configuration is illustrated in Figure 5.5. Note that the 3.3V input is connected to
VCC, VCCIO and 3V3OUT.
5.7
The FT231X contains an embedded MTP ROM. This can be used to configure the functions of each CBUS
pin, the current drive on each signal pin, current limit for the USB bus and the other descriptors of the
device. For details on using the MTP ROM/EEPROM programming utility FT_PROG, please see the
FT_PROG User Guide.
When programming the MTP ROM please note:
ii) The Max Bus Power setting of the MTP ROM should specify the maximum current to be drawn from
i) One of the CBUS Pins can be configured as PWREN# in the internal MTP ROM. This can be used to
switch the power supply to the external circuitry.
the USB host/hub when enumerated. For high-powered USB devices the current limit when
enumerated is between 100mA and 500mA, for low-powered USB devices the current limit is
100mA.
3.3V Voltage Supply
Configuring the MTP ROM
Vcc = 3.3V
MCU
TXD
RTS#
CTS#
RXD
Copyright © 2012 Future Technology Devices International Limited
Jumper JP1 - Closed
GND
Document Reference No.: FT_000652
RXD
TXD
RTS#
CTS#
3V3OUT
VCCIO
Vcc = 3.3V
VBUS
VCC
Clearance No.: FTDI#
Jumper JP2 - Open
12
UMFT231XE
Version 1.0
GND
294