UMFT231XE-01 FTDI, UMFT231XE-01 Datasheet - Page 7

no-image

UMFT231XE-01

Manufacturer Part Number
UMFT231XE-01
Description
Interface Development Tools USB to UART DIP Dev. Module
Manufacturer
FTDI
Type
USB to UARTr
Series
FT231Xr
Datasheet

Specifications of UMFT231XE-01

Rohs
yes
Product
Development Modules
Tool Is For Evaluation Of
FT231XQ
Interface Type
I2C, UART, USB
Operating Supply Voltage
3.3 V
Description/function
USB to UART evaluation module
Dimensions
29.02 mm x 19.24 mm x 9.2 mm
Operating Supply Current
1 A
Factory Pack Quantity
25
For Use With
FT231XQ
5
5.1
Jumper No.
JP1
JP1
Table 5.1 – Jumper JP1 Pin Description
Jumper No.
JP2
JP2
Table 5.2 – Jumper JP2 Pin Description
Note: There should never be more than one power output supplied to the same net. If JP2 is fitted when
an external power supply is applied a direct short between two power supplies will be formed, this can
result in damage to the UMFT231XE module and the target circuit.
Module Configurations
Jumper Configuration Options
Setting
Shorted
Opened
Setting
Shorted
Opened
Status
Default
Non-
Default
Status
Default
Non-
Default
Description
Connects internal 3.3V regulator to VCCIO. This restricts signal drive to only 3.3V
level signals.
Disconnects internal 3.3V regulator connection to VCCIO. This mode allows for the
supply of 1.8V-3.3V power from an external power supply, thus allows the
processing of signals with logic levels between 1.8V and 3.3V. VCCIO can be
adjusted to match the interface requirements of external circuitry.
Description
Connects VBUS to VCC. This mode is known as “USB-Powered” mode.
Disconnects VBUS to VCC. This allows the supply of power from an external power
supply. This mode is known as “Self-Powered” mode.
Copyright © 2012 Future Technology Devices International Limited
Document Reference No.: FT_000652
Clearance No.: FTDI#
7
UMFT231XE
Version 1.0
294

Related parts for UMFT231XE-01