LCMXO2-1200ZE-P1-EVN Lattice, LCMXO2-1200ZE-P1-EVN Datasheet - Page 6

• Manufacturer Part Number: LCMXO2-1200ZE-P1-EVN
• Description: Programmable Logic IC Development Tools MachXO2 Pico Dev Kit
• Manufacturer: Lattice
• Type: FPGAr

Specifications of LCMXO2-1200ZE-P1-EVN

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: LCMXO2-1200ZE
• Interface Type: RS-232, USB
• Operating Supply Voltage: 1.2 V
• Factory Pack Quantity: 1

Programming the MachXO2
Using ispVM System software, users can scan and perform JTAG operations, including programming, with the
MachXO2 device.
Setting Up Windows HyperTerminal
You will use a terminal program to communicate with the evaluation board. The following instructions describe the
Windows HyperTerminal program which is found on most Windows PCs. You may use another terminal program
but setup will be somewhat different. Windows 7 does not include HyperTerminal. Tera Term has been verified to
work with Windows 7. For Linux, Minicom is a good alternative.
Note: This step uses the procedure for Windows XP users. Steps may vary slightly if using another Windows ver-
sion.
1. From the Start menu, select Control Panel > System. The “System Properties” dialog appears.
Figure 4. Device Manager – COM Port
2. Select the Hardware tab and click Device Manager. The “Device Manager” dialog appears.
3. Expand the Ports (COM & LPT) entry and note the COM port number for the USB Serial Port.
4. From the Start menu, select Programs > Accessories > Communications > HyperTerminal. The
HyperTerminal application and a “Connection Description” dialog appear.
6
MachXO2 Pico Development Kit
User’s Guide