ADM00419 Microchip Technology, ADM00419 Datasheet - Page 11

• Manufacturer Part Number: ADM00419
• Description: Power Management IC Development Tools MCP2210 Breakout Module
• Manufacturer: Microchip Technology
• Type: Other Power Managementr

Specifications of ADM00419

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: MCP2210
• Input Voltage: 3.3 V, 5 V

2.1
2.2
© 2012 Microchip Technology Inc.
INTRODUCTION
KIT SETUP
Chapter 2. Installation and Operation
The MCP2210 Evaluation Kit is designed to demonstrate the device as a USB-to-SPI
(Master) bridge solution.
The Evaluation Kit is comprised of two boards that have the following features:
• MCP2210 Breakout Board:
• MCP2210 SPI Slave Motherboard:
Follow these steps to set up the MCP2210 Evaluation Kit:
1. Download the support material (PC applications and DLL libraries) that can be
2. Plug the MCP2210 Breakout Board into the MCP2210 SPI Slave Motherboard.
3. Connect the MCP2210 Breakout Board to a PC via a USB port.
4. The system will automatically install the driver for this board. When the
5. Install the downloaded PC software.
6. Start the demo application and exercise the SPI slave chip’s features.
- Small plug-in board with DIP form factor (0.6 inches overall row spacing
- Mini-USB connector
- Access to the SPI bus and all GP signals
- PICkit™ Serial Analyzer compatible header
- 3.3 or 5V jumper selectable V
- Socket for plugging in the MCP2210 Breakout Board
- Test-points for the SPI bus and GP signals
- PICkit™ Serial Analyzer header (it can be used to access only one of the SPI
- 8-bit I/O expander (MCP23S08) with eight LEDs
- Four channel, 12-bit ADC (MCP3204) – a potentiometer is used to vary the
- 2 kbit EEPROM – 25LC02
- Temperature sensor – TC77
between pins)
up to 500 mA to the rest of the system
slave chips present on this board – MCP23S08)
voltage on the Channel 1 ADC input
found on the board’s page (www.microchip.com/mcp2210evaluationkit).
installation is complete, the board is ready for operation.
MCP2210 EVALUATION KIT
DD
; the Breakout Board can be used to supply
USER’S GUIDE
DS52057A-page 11